16 Cables
16.1 Safety notes
CAUTION
▶
Always hold cables by their connectors when disconnecting them.
Never pull on the cable to disconnect cables.
▶
Ensure that none of the cables are scraped, strained or otherwise
damaged while replacing system components.
▶
Immediately replace cables with damaged shielding.
▶
Always use shielded network cables.
16.2 Basic information
For more cabling information, see "Supplied documents" on page 239.
16.3
Replacing the system cable (accessible
drives / top HDD cage)
The following steps are only required in case of a defective cable.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
TX1310 M5 Upgrade and Maintenance Manual 217
To Next Page
Loading...
