Concluding steps
▶
If applicable, install an expansion card, see "Installing an expansion card"
on page 1
18.
▶
Install the front fan, see "Installing the new front fan" on page 108.
▶
"Reassembling" on page 50.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
▶
"Installing the bay cover" on page 58.
▶
"Locking the server" on page 59.
15.5.4 Replacing an M.2 SSD
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 15 minutes
Tools: tool-less
Preliminary steps
▶
"Unlocking the server" on page 39.
▶
"Removing the bay cover" on page 40.
▶
"Shutting down the server" on page 41.
▶
"Disconnecting the power cord" on page 42.
▶
"Getting access to the component" on page 43.
▶
Remove the front fan, see "Removing the defective front fan" on page 106.
▶
If applicable, remove an expansion card, see "Removing an expansion
card" on page 119.
System board and components
204 Upgrade and Maintenance Manual TX1310 M5
To Next Page
Loading...
