Fujitsu PRIMERGY TX1310 M5

For system relevant information, see the hardware configurator of your
server available online at the following address:https://ts.fujitsu.com/
products/standard_servers/index.htm
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
9.3 Handling slot brackets
9.3.1 Installing slot brackets
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
Use the low profile bracket perforated for relevant controllers. No
bracket needed for installing the HDD controller in slot 1 of riser
module 1.
Expansion cards
TX1310 M5 Upgrade and Maintenance Manual 113