4.7 Reassembling
4.7.1 Safety notes
CAUTION
▶
Before attaching the covers, make sure no unnecessary parts or
tools are left inside the server.
▶
Before switching on the server
, make sure the side cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the side cover is removed.
▶
For more information, see "Important information" on page 25.
4.7.2 Inserting in the system board tray
Figure 16: Installing the system board tray
▶
Carefully push the system board tray back.
Basic hardware procedures
50 Upgrade and Maintenance Manual TX1310 M5
To Next Page
Loading...
