EasyManua.ls Logo

Fujitsu PRIMERGY TX1330 M3

Fujitsu PRIMERGY TX1330 M3
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24 Operating Manual
TX1330 M3
Functional overview
Interfaces
Onboard or integrated controllers
USB 2.0 connectors 4 (4x external rear, no USB wake-up supported)
USB 3.0 connectors 5 (2x external rear, 2x external front, 1x internal for
USB backup device)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C, usable for iRMC or system or
shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Management LAN
(RJ45)
1 x dedicated Management LAN port for iRMC S4
(10/100/1000 Mbit/s). Management LAN traffic can
be switched to shared onboard Gbit LAN port
RAID Controller Modular RAID 0/1 controller with "Integrated RAID"
(SAS IR) for SAS3.0.
RAID levels 0 and 1 are supported for internal HDD
configurations.
Modular RAID 0/1 controller with “MegaRAID
functionality” (SAS MegaRAID) for SAS3.0.
RAID levels 0, 1, 10, 1E, 5 and 50 are supported for
internal HDD configurations.
Modular RAID 5/6 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS3.0. RAID
levels 0, 1, 10, 1E, 5, 50, 6 and 60 are supported for
internal HDD configurations.
SATA Controller A 6-port SATA controller is integrated on the system
board; up to four SATA HDDs can be connected to
the controller. The LSI Embedded MegaRAID
software (SATA Software RAID) supports RAID
levels 0, 1 and 10.
Remote Management
Controller
Integrated Remote Management Controller
(iRMC S4), 256 MB DDR3-800 SRAM for video,
IPMI 2.0 compatible
Trusted Platform
Module (TPM)
Infineon V1.2 / V2.0 compliant (option)

Table of Contents

Related product manuals