Need help?Do you have a question about the Fujitsu PRIMERGY TX150 S7 and is the answer not in the manual?
General| Tcase | 72.7 °C |
|---|---|
| Bus type | DMI |
| Stepping | B1 |
| FSB Parity | No |
| Processor code | SLBLJ |
| Processor cache | 8 MB |
| Processor cores | 4 |
| Processor model | X3430 |
| System bus rate | 2.5 GT/s |
| Processor series | Intel Xeon 3400 Series |
| Processor socket | LGA 1156 (Socket H) |
| Processor codename | Lynnfield |
| Motherboard chipset | Intel® 3420 |
| Processing Die size | 296 mm² |
| Processor frequency | 2.4 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 45 nm |
| Processor manufacturer | Intel |
| Processor package size | 37.5 x 37.5 mm |
| Processor front side bus | - MHz |
| Processor boost frequency | 2.8 GHz |
| Processor operating modes | 64-bit |
| ECC supported by processor | Yes |
| PCI Express configurations | 1x16, 2x8, 4x4 |
| Supported instruction sets | SSE4.2 |
| Thermal Design Power (TDP) | 95 W |
| Number of processors installed | 1 |
| CPU multiplier (bus/core ratio) | 18 |
| Physical Address Extension (PAE) | 36 bit |
| Maximum number of PCI Express lanes | 16 |
| Memory types supported by processor | DDR3-SDRAM |
| Number of Processing Die Transistors | 774 M |
| Memory channels supported by processor | Dual |
| Memory clock speeds supported by processor | 800, 1066, 1333 MHz |
| Memory bandwidth supported by processor (max) | 21 GB/s |
| Maximum internal memory supported by processor | 32 GB |
| HDD size | 3.5 \ |
| HDD interface | Serial ATA |
| Optical drive type | DVD Super Multi |
| Total storage capacity | 750 GB |
| Maximum storage capacity | - TB |
| Number of HDDs installed | 3 |
| Drive bays | 4x 3.5\ |
| DVD interface type | SATA |
| Memory slots | 6x DIMM |
| Internal memory | 4 GB |
| Memory clock speed | 1333 MHz |
| Memory layout (slots x size) | 2 x 2 GB |
| Networking features | Gigabit Ethernet |
| PS/2 ports quantity | 0 |
| USB 2.0 ports quantity | 10 |
| Ethernet LAN (RJ-45) ports | 2 |
| PCI Express slots version | 2.0 |
| Power supply | 350 W |
| Power requirements | AC 100-240V, 47-63Hz |
| Compatible operating systems | Microsoft Windows Server 2008 R2, Microsoft Windows Server 2008, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware vSphere 4.1 |
| Certification | TÜV GS, CE A, 2004/108/EC, EN 300386, EN 50371, EN 55022, EN 55024, EN 60950 - 1, EN 61000-3-2 JEIDA, EN 61000-3-3, CSAc/us, ULc/us, FCC A, CB, RoHS, WEEE, VCCI A + JIS 61000-3-2, GOST-R, CCC, C-Tick, BSMI A, CNS 13436 |
| Chassis type | Tower (5U) |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Processor ARK ID | 42927 |
| Intel® Turbo Boost Technology | 1.0 |
Weight and Dimensions| Depth | 584 mm |
|---|---|
| Width | 205 mm |
| Height | 444 mm |
Provides critical safety guidelines for installation, operation, and maintenance of the server.
Details important safety and procedural notes for rack installation.
Step-by-step guide for safely unpacking the PRIMERGY TX150 S7 server.
Instructions for setting up the server in a floorstand configuration.
Guide for installing and removing the server in a standard rack.
Explains how to connect external devices to the server's ports.
Details how to connect the server to the electrical power supply.
Provides instructions for powering the server on and off.
Explains how to configure the server and install the operating system.
Explains how to use BIOS Setup for data and system security.
Addresses issues where the power-on indicator does not light up.
Discusses potential causes and solutions for the server shutting down unexpectedly.
Provides steps to resolve issues with a blank monitor screen.
Helps diagnose and fix flickering stripes on the monitor display.
To Next Page