Fujitsu PRIMERGY TX150 S7 - Installing a New Memory Module

108 Operating Manual TX150 S7
Non-hot-plug components CSS components
8.2.3.2 Installing a new memory module
V CAUTION!
Please note the equipping rules in the technical manual for the system
board D2759.
Figure 30: Installing a memory module
Ê Carefully press the memory module into the slot (1) until the fastening tabs
on both sides of it engage (2).
Ê Reinstall the system fan (see section "Replacing the system fan" on
page 106).
/
0
0