Fujitsu PRIMERGY TX150 S7 - Indicators on the Hot-Plug Power Supply Units

70 Operating Manual TX150 S7
Control elements and indicators Starting up and operation
5.2.2.2 Indicators on the hot-plug power supply units
Figure 18: Indicators on the hot-plug power supply units
1 Lights yellow when the server is switched off, but mains voltage is
present (standby mode).
Lights green when the server is switched on and functioning properly.
2 Off when the PSU is functionning properly.
Lights orange in case of PSU prefailure.
Flashes orange in case of a PSU failure.
/
0