Fujitsu PRIMERGY TX150 S7 - Replacing a Memory Module; Removing a Defective Memory Module

TX150 S7 Operating Manual 107
CSS components Non-hot-plug components
8.2.3 Replacing a memory module
8.2.3.1 Removing a defective memory module
Ê Remove the system fan to get access to the memory modules (see section
"Replacing the system fan" on page 106).
Figure 29: Removing a memory module
Ê Press the holders on either side of the memory slot concerned outward (1).
Ê Pull the defective memory module out of the slot (2).
/
/
0