Fujitsu PRIMERGY TX150 S7 - Replacing an Expansion Card; Removing a Defective Expansion Card

TX150 S7 Operating Manual 109
CSS components Non-hot-plug components
8.2.4 Replacing an expansion card
8.2.4.1 Removing a defective expansion card
Figure 31: Removing a defective expansion card
Ê If necessary, remove the cables from the defective expansion card.
Ê Push the lever upwards (1).
Ê Press onto the clip and remove it.
Ê Pull the defective expansion card out of its slot (2).
I For the installing order see the configurator provided for the TX150 S7:
http://ts.fujitsu.com/products/standard_servers/index.htm
(for the EMEA market)
http://primeserver.fujitsu.com/primergy/system.html for the Japanese market
0
/