EasyManua.ls Logo

Fujitsu PRIMERGY TX150 S7 - 9 Appendix: Server Specification

Fujitsu PRIMERGY TX150 S7
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX150 S7 Operating Manual 113
9 Appendix: server specification
This section explains the specifications for the server. The specifications for this
server are liable to be updated without any notice. Please be forewarned.
System Board
Processor
Memory Modules Configuration
Interfaces
System board type D2759
Chipset Intel 3420
Processor quantity and
type
1x Intel Xeon/Pentium/Core i3/Celeron processor
Memory slots 6
Memory slot type DIMM (DDR3)
Memory capacity
(min. - max.)
1 GB - 32 GB
Memory protection ECC
Memory notes 4 or 8GB RDIMM and all UDIMM modules: 4 DIMMs
max; with 2 channels and 2 slots per channel.
UDIMMs (max. 16MB) with all processors; RDIMMs
(max. 32 GB) for Xeon CPUs only
USB connectors 10 x USB 2.0 (3x front, 4x rear, 3x internal)
Graphics (15-pin) 1 x VGA
Serial 1 (9-pin) 1 x serial RS-232-C, usable for iRMC or system or
shared
Serial 2 (9-pin) 1 x serial RS-232-C (optional)
LAN / Ethernet (RJ-45) 1 x Gbit/s Ethernet

Table of Contents

Related product manuals