223
PRIMERGY TX150 S4 User’s Guide
8
Configuring Hardware and utilities
8.2.5 Advanced Menu
The [Advanced] menu sets the peripheral device and PCI device options.
Boot Sequence • CD-ROM Drive
• Diskette
•Hard Drive
• Legacy LAN Card
The order of reading the OS is set by pressing [Enter].
Use the [+] [-] keys to change the order of priority for the
selected device. Booting from a selected device can be
disabled with the [Space] key. (The mark "!" is displayed by
the name of the disabled device.) If a non-existing device is
displayed, delete it from the list by pressing the [*] key.
table: Items on the Advanced Menu
Item Setting Description
Peripheral Configuration Configures the serial port, parallel port, etc. Press the [Enter] key to display the
"8.2.6 Peripheral Configuration Submenu" (Jpg.224) window.
PCI Configuration Configures the PCI device. Press the [Enter] key to display the "8.2.7 PCI
Configuration Submenu" (Jpg.226) window.
Advanced System
Configuration
Configures additional settings. Press the [Enter] key to display the "8.2.8
Advanced System Configuration Submenu" (Jpg.227) window.
Power On/Off Configures power On/Off settings. Press the [Enter] key to display the "8.2.9
Power On/Off Submenu" (Jpg.229) window.
IPMI Configures server management settings. Press the [Enter] key to display the
"8.2.10 IPMI Submenu" (Jpg.230) window.
Reset Configuration Data • Yes
• No (Initial value)
Sets whether or not to initialize the Extended System
Configuration Data (ESCD) where the system resources
are recorded.
table: Items on the Boot Options Submenu
Item Setting Description
Item Specific Help
Change Values-/+
F9
Select Item
Select Menu
Select Sub-MenuEnter
F1
Esc
Help
Exit
F7
Mod. Defaults
Previous Values
Advanced Security Server ExitMain
Peripheral
Configuration
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
IMPI
Reset Configuration Data:
[No]
Setting items on this menu to incorrect values
may cause your system to malfunction.
Setup Warning