EasyManua.ls Logo

Fujitsu primergy TX150 - Chapter 7 Installing Internal Options; Before Installing Hardware Options

Fujitsu primergy TX150
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
184
Chapter 7 Installing Internal Options
7.1 Before Installing Hardware
Options
The following types of hardware options can be installed in this server.
` If the optional devices listed below are purchased, refer to the following to check the packaged items
before installing.
MemoryJ"B.1 Memory" (pg.291)
Internal Hard Disk Units J"B.2 Internal Hard Disk Units" (pg.292)
` When installing and removing options, make sure to use the removed screws on the same devices that
were last installed or removed. Failure to do so can damage the device.
` The types of optional devices listed in this manual are liable to be updated without any notice. Please
be forewarned.
3.5-inch internal option
5-inch internal option
Expansion cards
Memory
modules

Table of Contents

Related product manuals