Fujitsu primergy TX150 - Jumper Settings; Jumper Location and Settings

216
Chapter 8 Configuring Hardware and Utilities
8.1 Jumper Settings
The BIOS password setting can be deleted through the jumper settings.
` Do not change the jumper settings except when deleting the BIOS password.
8.1.1 Jumper Location and Settings
■ Jumper Location
The jumper of the server is located on the baseboard as shown below.
■ Jumper Settings
To delete password setting, set the jumper as follows:
㪡㫌㫄㫇㪼㫉
䇼at the normal operation䇽䇼to delete password䇽