Fujitsu primergy TX150 - RAID Management Tool [Global Array Manager]; Installing RAID Management Tool (Global Array Manager)

176
Chapter 6 High Reliability Tools
6.1 RAID Management Tool [Global
Array Manager]
RAID Management Tool is software that performs array configuration, disk
initialization and disk array monitoring. For more details, refer to "Onboard SCSI
RAID User’s Guide" and the manual which comes with the SCSI array controller
card.
OS installation using ServerStart
` If the OS is installed using ServerStart, RAID Management Tool is installed with the OS and other high
reliability tools.
6.1.1 Installing RAID Management Tool (Global Array
Manager)
To Install RAID Management Tool individually using the standard installer, follow the procedures
below.
` Before installing Global Array Manager, check that TCP/IP is installed and works properly.
1 Log on to the server with administrator privileges.
` Exit all programs before starting installation.
Installation will fail if “Event Viewer” or “Computer Management” is run.
2 Insert the SCSI Array Controller Document & Tool CD V6.0L10. Click [Start] →
[Run...].
3 Enter a name in the [Open:] field as follows and click [OK].
[CD-ROM drive]:\RAIDTOOL\GAM\Windows\install.bat
Installation starts and the wizard window appears.
For subsequent procedures, refer to "Onboard SCSI RAID User’s Guide" and the manual which
comes with the SCSI array controller card.