Fujitsu Primergy TX120 - User Manual

1
PRIMERGY TX120 User’s Guide
Areas Covered
Before Reading This Manual
This section explains the notes for your safety and conventions used in this manual.
Chapter 1
Overview
This chapter explains component names and basic operations of this server, as well as an
overview of the software provided with this server. In addition, the workflow, from placing the
server to starting the operation, is also described.
Chapter 2
Checking before OS Installation
This chapter explains the preparation on the server and cautions necessary before OS installation.
Please read this chapter before starting installation.
Chapter 3
OS Installation Using ServerStart
This chapter explains how to install the OS in the server using ServerStart.
Chapter 4
Manual OS Installation
This chapter explains how to install the OS without using ServerStart.
Chapter 5
Operations after OS Installation
This chapter explains the operations to be performed after OS installation. Be sure to perform
those operations before operating the server.
Chapter 6
High Reliability Tools
For stable PRIMERGY server operations, we recommend that high reliability tools be installed.
This chapter explains the installation and necessary settings of high reliability tools.
Chapter 7
Installing Hardware Options
This chapter explains how to install internal options.
Chapter 8
Configuring Hardware and Utilities
This chapter explains how to make the environment settings necessary to operate the server and
how to use each utility.
Chapter 9
Operation and Maintenance
This chapter explains the operations that become necessary after starting to use this server as well
as daily care and maintenance.
Appendix
This appendix explains the specifications for the server and for its internal options.

Fujitsu Primergy TX120 Specifications

General

Brand	Fujitsu
Model	Primergy TX120
Category	Server
Language	English

Summary

Chapter 1 Overview

1.1 TX120 Features

Details the server's high-speed processing, cost-effectiveness, scalability, and space-saving design.

1.2 Supplied Software

Introduces ServerStart setup tool and high reliability tools for server operation.

1.3 Component Names and Functions

Explains server component names and functions with diagrams.

Chapter 2 Checking before OS Installation

2.1 Preparation on the Server

Covers installing internal options and performing necessary hardware settings before OS installation.

2.2 Selecting the Installation Method

Guides users in choosing between ServerStart and manual OS installation.

Chapter 3 OS Installation Using ServerStart

3.1 Guided Mode

Step-by-step wizard for specifying hardware configuration and OS installation using ServerStart.

3.4 Remote Installation

Method to save resources and install OS via network for multiple servers.

Chapter 4 Manual OS Installation

4.1 Creating Driver Disks

Details the process of creating driver installation disks for manual OS installation.

4.2 Starting Manual Installation

Provides step-by-step instructions for manually installing Windows Server 2003 and Linux.

Chapter 5 Operations after OS Installation

5.1 Memory Dump;Paging File Setting

Explains how to configure settings for obtaining memory dumps and managing paging files.

5.2 Creating a Disk for System Recovery

Details the process of creating a system recovery disk using the Automated System Recovery (ASR) set.

Chapter 6 High Reliability Tools

6.1 RAID Management Tool

Explains RAID management for array configuration, disk initialization, and monitoring.

6.2 Server Monitoring Tool [ServerView]

Details ServerView for monitoring server hardware status and detecting errors.

Chapter 7 Installing Hardware Options

7.3 Installing Memory Modules

Provides instructions on installing memory modules, including location and proper handling.

7.4 Installing Expansion Cards

Explains card types, notes, and detailed installation procedures.

Chapter 8 Configuring Hardware and Utilities

8.1 Jumper Settings

Explains jumper locations and settings for BIOS password recovery and CMOS clearing.

8.2 BIOS Setup Utility

Details how to start, exit, and navigate the BIOS Setup Utility for configuration.

Chapter 9 Operation and Maintenance

9.1 Daily Maintenance

Covers checking server condition and cleaning procedures.

9.2 Troubleshooting

Provides resolutions for hardware problems, error messages, and software issues.

Appendix

A Server Specifications

Provides detailed specifications for the server hardware, including CPU, memory, and ports.

B Specifications for Internal Options

Lists specifications for internal options like memory and hard disks.

D Remote Management Controller

Explains the functions and preparation for using the Remote Management Controller.