Fujitsu Primergy TX120 - Window of the Remote Management Controller

254
D Remote Management Controller
D.3 Window of the Remote Management Controller
The Remote Management Controller uses the Web interface function.
The following window appears when starting the Remote Management Controller.
The following functions are available.
` For usage of the Remote Management Controller, refer to "ServerView User's Guide".
 Comparison with server management function of ServerView
ServerView, software provided with the server, can manage the server remotely if OS is normally
operating. The Remote Management Controller can operate even in the state of the server hang,
therefore, it is effective when the server cannot be monitored by ServerView.
table: Functions of the Remote Management Controller
Item Description
System Information Displays the system information.
iRMC Information Displays Remote Management Controller information and configures
the license key.
Power On/Off This is used to turn the server power ON/OFF or restart.
Sensors Displays the status of each server sensor (fan, temperature, voltage and
power supply).
System Event Log Displays the system event log.
Server Management Displays and configures the server management information.
Network Settings Configures the network settings.
Alerting Sends alert.
User Management Displays and configures the user information.
Advanced Video Redirection Starts up the Video Redirection.