Fujitsu Primergy TX120 - Creating a DOS Diskette

139
PRIMERGY TX120 User’s Guide
5
Operations after OS Installation
5.4.2 Creating a DOS Diskette
For DOS data stored into the floppy disk, refer to the file in the following folder of the ServerStart Disc
1 CD-ROM.
[CD-ROM drive] :\FreeDOS
To create a DOS diskette, you need an unused floppy disk. Prepare it in advance.
1 Start up ServerStart and Click [FloppyBuilder].
For details on procedures for starting up ServerStart, refer to " Starting ServerStart" (Jpg.136).
2 Click [DOS Diskette].
Insert the prepared floppy disk by following the message.
3 Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS diskette will be created automatically.
When a message appears indicating that the disk is created, click [OK] and eject the disk.