107
PRIMERGY TX120 User’s Guide
4
Manual OS Installation
For Windows Server 2003
*1: Created by the ServerStart FloppyBuilder function
4.1.2 How to Create Driver Disks [FloppyBuilder function]
Driver disks are created from the ServerStart CD-ROM using the ServerStart FloppyBuilder function.
The FloppyBuilder function is available in the following environments.
• Starting up the ServerStart system on a client computer (Recommended)
• Starting up the system from the ServerStart CD-ROM on the server
` When creating driver disks on a client computer, it is necessary to install ServerStart on the client
computer beforehand. Install it according to "2.4 Preparation for Using ServerStart on a Client
Computer" (Jpg.46).
If a different version of ServerStart has been installed, uninstall it and install the proper version. For
details on how to uninstall ServerStart, refer to "2.4.2 Uninstalling ServerStart" (Jpg.48).
Starting ServerStart
If ServerStart has already been started, you do not have to restart it. If it is not started, perform the
following startup procedures.
table: Drivers Required for Installing Windows Server 2003
Expansion card / onboard controller Driver
Chipset Driver provided with the Server Start CD-ROM
Graphic controller Standard driver provided with the OS
Onboard SAS controller Integrated Mirroring SAS Driver Windows 2000/2003 Drivers
Disk V1.21.13L10
*1
Onboard LAN TX120 Onboard LAN Driver Windows 2003 Drivers Disk
Ver9.25.0.0
*1
LAN card (PG-1882L/PG-1892L)
PG-185x/186x/188x/189x LAN Driver Windows 2000/2003
Drivers Disk Ver10.3
*1
LAN card (PG-2861L/PG-289L)
PG-286x LAN Driver Windows 2000/2003 Drivers Disk
Ver10.3
*1
SCSI card (PG-1301L) Standard driver provided with the OS
Other expansion cards Driver supplied with the expansion card
To Next Page
Loading...
Need help?
General