Fujitsu Primergy TX120 User Manual

108
Chapter 4 Manual OS Installation
z For Creation on a Client Computer
1 Insert the ServerStart Disc 1 CD-ROM into the client computer.
2 Click [Start] → [Programs] → [Fujitsu Siemens ServerStart] →
[ServerStart(start from CD)].
ServerStart starts up and the [Welcome to ServerStart] window appears.
z For Creation on the Server
` Confirm that the USB floppy disk drive has been connected before turning on the server.
1 Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.
ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.
2 Insert the attached [ServerStart floppy disk] into the server's floppy disk drive.
Then make sure "Removable media" and "A:" are selected and click [Create].
A network setup window for remote installation appears.
` If a configuration file already exists in the ServerStart floppy disk and [OK] is clicked without
clicking [Create], the [ServerStart Unattended Mode] window appears. Make sure to click
[Exit]. The [Welcome to ServerStart] window appears.
If [Start] is clicked in the [ServerStart Unattended Mode] window, the installation of the server
will start and all disk contents will be deleted.

Fujitsu Primergy TX120 Specifications

General

Brand	Fujitsu
Model	Primergy TX120
Category	Server
Language	English