118
Chapter 4 Manual OS Installation
z When a recognized network adapter is not present
For Windows Server 2003 x64
Perform " Installing the LAN Driver" (Jpg.119) on [Ethernet controller] under [Other devices].
For Windows Server 2003
Perform " Installing the LAN Driver" (Jpg.121) on [Ethernet controller] under [Other devices].
When the LAN driver is installed to [Other devices] before updating the driver for the network
adapter recognized immediately after the OS installation
` When driver installation starts, the following window appears.
Clicking [Finish] displays the [Help and Support Center] window. Click [X] to close the window.
After installation, the "!" mark is displayed at the LAN device name in Device Manager. Device names
are displayed properly when all LAN drivers are installed and the system is restarted.
4.3.1 Installing the LAN Driver (Windows Server 2003 x64)
LAN cards except PG-2861 are recognized as the network adapters when the OS is installed.
Perform "
Updating the LAN Cards" (Jpg.119) on all LAN device names under [Network adapters],
and then perform "
Installing the LAN Driver" (Jpg.119) on the Ethernet controllers under [Other
devices].
` For the following LAN cards, the network adapters are recognized when the cards are mounted during
OS installation.
• PG-1892L
To Next Page
Loading...
Need help?
General