17
PRIMERGY TX120 User’s Guide
1
Overview
z Supported OSs
The following OSs can be installed using ServerStart V6.609.
• Microsoft
®
Windows Server
®
2003, Standard Edition
• Microsoft
®
Windows Server
®
2003, Enterprise Edition
• Microsoft
®
Windows Server
®
2003, Standard x64 Edition
• Microsoft
®
Windows Server
®
2003, Enterprise x64 Edition
• Microsoft
®
Windows Server
®
2003 R2, Standard Edition
• Microsoft
®
Windows Server
®
2003 R2, Enterprise Edition
• Microsoft
®
Windows Server
®
2003 R2, Standard x64 Edition
• Microsoft
®
Windows Server
®
2003 R2, Enterprise x64 Edition
` ServerStart does not support to install Linux.
` The OS which the server does not support cannot be installed.
z Configuration File (SerStartBatch.ini)
A configuration file stores the server setup information configured in ServerStart. To create a
configuration file, use the ServerStart floppy disk supplied with this server. Store only one file on each
floppy disk. Do not set the ServerStart floppy disk to the write-protected state.
You can use any name for the configuration file. However, the file must be installed in the server as
"SerStartBatch.ini". When installing the configuration file, make sure to save it as "SerStartBatch.ini" on
the ServerStart floppy disk.
Start up ServerStart, insert the ServerStart floppy disk containing "SerStartBatch.ini", and click [Start]
to install the server.
To Next Page
Loading...
Need help?
General