200
Chapter 8 Configuring Hardware and Utilities
8.2.8 Advanced System Configuration Submenu
Use this menu to configure the settings which are related to CPU, memory and USB.
table: Items on the Advanced System Configuration Submenu
Item Setting Description
ECC Memory Checking Enabled (Unchangeable)
Sets whether to enable or disable to check ECC
error of memory.
PCI Bus Parity Checking Enabled (Unchangeable) Sets whether to enable or disable the PCI bus parity
checking.
BIOS Work Space Location Expansion ROM Area
(Unchangeable)
Sets the location on the memory to assign the data
area that BIOS uses.
Limit CPUID functions Disabled (Unchangeable)
Sets whether or not to limit CPUID expanded
function. If the OS does not support expanded
function, the system may not start.
CPU Mismatch Detection Enabled (Unchangeable) Sets whether to enable or disable checking the CPU
type and frequency.
CPU Thermal Management Enhanced (Unchangeable) Configures the CPU internal setting.
CPU Halt Mode
Enhanced (Unchangeable)
NX Memory Protection • Disabled (Initial value)
•Enabled
Sets whether to enable or disable "execute disable
bit function" of processor.
Virtualization Technology
• Disabled (Initial value)
•Enabled
Sets whether to enable or disable Virtualization
Technology.
Hardware Prefetch
Enabled (Unchangeable)
Configures the CPU internal setting.
Adjacent Sector Prefetch
Enabled (Unchangeable)
CPU Timeout Counter
Disabled (Unchangeable)
Enhanced SpeedStep Disabled (Unchangeable) Sets whether to enable or disable the power saving
function.
CPU MC Status Clear Next Boot
(Unchangeable)
Configures the CPU internal setting.
Item Specific Help
Change Values-/+
F9
Select Item
Select Menu
Select Sub-MenuEnter
F1
Esc
Help
Exit
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
Advanced System Configuration
ECC Memory Checking:
PCI Bus Parity Checking:
BIOS Work Space Location:
Limit CPUID Functions:
CPU Mismatch Detection
CPU Thermal Management:
CPU Halt Mode:
NX Memory Protection:
Virtualization Technology:
Hardware Prefetch:
Adjacent Sector Prefetch:
CPU Timeout Counter:
[Enabled]
[Enabled]
[Expansion ROM Area]
[Disabled]
[Enabled]
[Enhanced]
[Enhanced]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]