Fujitsu Primergy TX120 User Manual

52
Chapter 3 OS Installation Using ServerStart
3.1 Guided Mode
In guided mode, follow the wizard to specify hardware configuration and the OS to be
installed, save the information necessary for installation in a configuration file, and
install the OS.
3.1.1 Starting Up the Guided Mode
Start up the guided mode.
` Confirm that the USB floppy disk drive has been connected before turning on the server.
1 Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately.
ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.
2 Insert the ServerStart floppy disk supplied with the server. Make sure that
"Removable media" and "A:" are selected and click [Create].
` Set the ServerStart floppy disk in the write-enabled state.
` To install the OS other than Windows Server 2003 x64 on the server which has no floppy disk
drive, select [No status backup / Keine Statussicherung] and click [OK]. When installing the OS
without the floppy disk, RAID cannot be configured using ServerStart. Configure the RAID
manually in advance and start up the server.

Fujitsu Primergy TX120 Specifications

General

Brand	Fujitsu
Model	Primergy TX120
Category	Server
Language	English