Fujitsu Primergy TX120 - Internal Hard Disk Units; Power Cord Selection

244
B Specifications for Internal Options
B.2 Internal Hard Disk Units
 Package
• Hard disk unit (1)
 Specifications
*1:The value indicates memory capacity of the formatted hard disk (1GB = 1000
3
bytes).
*2:A Hot plug carrier is not included.
B.3 Power Cord Selection
The power cord for this unit has been packed separately and has been selected according to the country
of destination. It must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set.
The female receptacle of the cord set must meet CEE-22 requirements (see Figure).
table: Internal Hard Disk Unit Specifications
Item Function and Specification
Models PG-HDD61A PG-HDD71A
Interface SAS (Serial Attached SCSI)
Storage media 2.5-inch hard disk
Memory capacity
*1
36.7GB 73.4GB
Maximum data transfer speed 3Gbit/s
Average latency speed 3.00ms
Rpm 10,025rpm
Dimensions
*2
70.1 × 100.45 × 15 (mm)
Weight
*2
0.22kg