138
Chapter 5 Operations after OS Installation
Creating a Hardware Configuration Tool
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1 Start up ServerStart and click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2 Click [Hardware Configuration Tools].
3 Click the tool you want to create.
Insert the prepared floppy disk by following the message.
4 Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The respective tools will be created automatically. When a message appears indicating that the
disk is created, click [OK] and eject the disk.
To Next Page
Loading...
Need help?
General