14
Chapter 1 Overview
1.1 TX150 S4
This server is entry server with high-speed processing and cost-effectiveness. This
server has the following features.
■ High Reliability
●
Memory Modules Enabling High-Speed Processing
For the memory, the system is equipped with DDR II 533 Unbuffered Lowprofile enabling high-speed
processing.
● Disk Array Configuration
The server functions as the onboard SCSI array controller by configuring the array system with the
onboard SCSI controller. In the case of the onboard SCSI array controller, the array system (RAID1) can
be configured with two hard disk drives.
Also, a SCSI array controller card is supported. In the case of the SCSI array controller card, the
RAID1/5/10 can be configured.
When configuring the array system using onboard SCSI controller
` Up to two hard disk units can be installed.
● Redundant Function
For the disk array configuration (RAID1/5/10), a failed hard disk unit in a storage system can be
replaced or repaired without turning off the server and peripheral devices (a hot-plug is supported).
● Hardware and Software Designed for Data Security
Locks on the drive covers and the password setting in the BIOS Setup Utility protect hardware and data
assets in the server against theft, ensuring data security.
● Proactive Fan Function
When a fan fails or the ambient temperature rises, the system fan speed is increased automatically to
avoid increase in temperature in the server, ensuring stable server operation.
● High Reliability Tools
High reliability tools, such as ServerView which is the tool for monitoring the server status, offer stable
system operation. For information about high reliability tools, refer to "1.2.2 High Reliability Tools"
(
Jpg.20).
To Next Page
Loading...
Need help?
General