To Next Page

To Previous Page

70 Operating Manual TX120 S3

Starting up and operation

6.5 Configuring the server

This section contains information about configuring the server and installing the

operating system.

6.5.1 Configuring the onboard SATA controller

A SATA controller is integrated on the system board. You can configure the

onboard SATA controller either before or during installation with the ServerView

Installation Manager. Using the ServerView Installation Manager is

recommended.

I The controller has its own configuration utility. For further information,

refer to the “Embedded MegaRAID Software User’s Guide” (on the

ServerView Suite DVD 2 under Industry Standard Servers - Expansion Cards

- Storage Adapters - LSI RAID / SCSI Controllers).

I Descriptions of operating systems not covered in the controller manual

are provided in the corresponding readme files on the driver CDs.

6.5.2 Configuring the SAS/SATA RAID controller

The server has a SAS/SATA RAID controller with "Integrated Mirroring

Enhanced" functionality or "MegaRAID functionality". You can configure the

SAS/SATA RAID controller either before or during installation with the

ServerView Installation Manager. Using the ServerView Installation Manager is

recommended.

I The controller makes a separate utility available for IME configuration.

For further information, refer to the "Integrated RAID for SAS User’s

Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -

Expansion Cards - Storage Adapters - LSI RAID / SCSI Controllers).

A separate utility is available to the controller for MegaRAID

configuration. For further information, refer to the "SAS Software User’s

Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -

Expansion Cards - Storage Adapters - LSI Configuration Software).

Further information on modular RAID controllers is provided in the

"Modular RAID Controller Installation Guide" (on the ServerView Suite

DVD 2 under Industry Standard Servers - Expansion Cards - Storage Adapters

- LSI RAID / SCSI Controllers).

Fujitsu PRIMERGY TX120 S3 User Manual

Other manuals for Fujitsu PRIMERGY TX120 S3