TX120 S3 Operating Manual 29
3 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter "Important information" on page 31.
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section "Unpacking the server" on page 44).
Ê Make sure that all necessary manuals (see "Documentation overview" on
page 12) are available; print out the PDF files if required.
Ê Set up the server (see section "Setting up the server" on page 45).
Ê Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 51 and "Notes on connecting/disconnecting cables" on
page 54.
Ê Connect the server to the mains (see section "Connecting the server to the
mains" on page 52).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section "Controls and indicators" on page 59).
Ê Configure the server and install the desired operating system and
applications. The following options are available:
– Remote installation with the ServerView Installation Manager:
With the ServerView Suite DVD 1 provided, you can configure the server
and install the operating system in a convenient manner.
Details on how to operate the ServerView Installation Manager, as well
as some additional information, are included in the "ServerView Suite
Installation Manager" user’s guide (on ServerView Suite DVD 2 under
Industry Standard Servers - Software - ServerView Suite - Server Installation
and Deployment).
Configuration information can also be found in section "Configuring the
server and installing the operating system with the ServerView
Installation Manager" on page 71.
To Next Page
Loading...
Need help?
General