Fujitsu SCENICVIEW XP70 - OSD Menu Operation (Projector Controls); OSD Menu Operation (Remote Control)

Downloaded from Projector.com
SCENICVIEW XP70
A26361-K954-Z100-1-5E19, edition 5 English - 15
Operating the OSD menu with the projector’s OSD menu
Activating the OSD menu
► Press the "Menu" button on the projector.
The basic menu is displayed.
Marking a function or submenu
► Use the arrow buttons to move the cursor to the desired function or submenu.
Selecting a function or submenu
► Press the "Source/Select" button.
The submenu opens, or you can make the desired settings.
Setting a function
► Press the
or buttons until the setting is correct.
If the function can only be activated or deactivated:
► Select the desired function and activate it by pressing the "Source/Select" button.
Saving setting and terminating OSD menu
► Press the "Menu" button on the projector.
i
If you do not make a selection for about 40 seconds, the OSD menu closes, and the set
value is stored.
Returning to the higher-level menu
► If you want to return to the higher-level menu, select the
symbol and confirm your selection
with the "Select" button.
Operating the OSD menu with the remote control
Activating the OSD menu
► Press the "Menu" button on the remote control.
The basic menu is displayed.
Marking a function or submenu
► Use
or buttons on the remote control to move the selection to the desired function or
submenu.