Downloaded from Projector.com
SCENICVIEW XP70
20 - English A26361-K954-Z100-1-5E19, edition 5
System menu
In the System menu you can adjust general operating settings.
Rear
If you project the image from the back against a translucent surface, this setting flips the
image horizontally.
SourceSearch
With this function, the projector automatically looks for a signal source (computer or video).
Hide OSD
If you activate this function, the menu functions are no longer displayed over the projected
image (for example, when you adjust the volume or change the signal source). This function
is useful if you have to adjust the volume during a presentation.
DPMS enable
This function activates the DPMS (Display Power Management Signaling). When the
projector receives a corresponding signal from the computer, it switches to power-saving
mode.
Language menu
On the Language menu you can select the language for the OSD
menu.
To Next Page
Loading...