Preparing your notebook for use
Selecting the location
Location,selectingtheNotebookPoweradapte r
Select a su itable location for the notebook before setting it up. Consider
the following points when se lecting a loca tion:
• Never place the n otebook and the mains adapter on a heat-sensitive
surface. This could damage the surface.
• Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause damage due to overheating.
• Do not place the notebook directly on your legs for extended periods. The
underside of the notebook heats up during normal operation. Extended contact
with the skin can become unpleasant or even result in burns.
• Place the notebo ok on a stable, flat, non-slip surface. Please note that
the r ubber feet may mark certain types of surfaces.
• Keep other objects 100 mm away from the notebook and its mains
adapter to ensure adequate ventilation.
• Never cover the ventilation slots on the notebook.
• Do not expose t he notebook to extreme environmental conditions. Protect
the notebook against dust, humidity and heat.
Connecting the mains adapter
Preparingfor operationMainsadapter
Please observe the safety precautions in the enclosed "Safety" manual.
The supplied mains cable conforms to the requiremen ts of the country in which
you purchased your n otebook. Make sure that the mains cable is approved
for use in the co untry in which you intend to use it.
The mains cable of the mains adapter must only be connected to a mains
socket if the notebook is connected to the mains adap ter.
Make sure that the rated current of the mains adapter is not higher than that
of the power syste m to which you connect the mains ad apter (refer to the
"Technical Data" section, "Mains adapter ", Page 6 ).
1
2
3
► Connect the mains adapter cable (1) to the
DC jack (DC IN) on the notebook.
► Connect the mains cable (2) to the
mains adapter.
► Plug the mains cable (3) into a mains outlet.
4 - English 10600969176, edition 1