Fujitsu UTH-3TA16 - Function Information by Model

En-2
Wall Mounted Type
Duct type
Cassette Type
Floor/Ceiling
Universal Type
Ceiling Wall Type
Model
Button numbers (refer to page 1)
1234567890ABCD
*3 *4 *5
*4 *5
*4 *5
*4 *5
FUNCTION INFORMATION
Depending on the indoor unit model, some buttons on this remote controller cannot be used and some functions are re-
stricted.
Refer to the following table for the buttons that can be used for each model.
: Button can be operated
: Button cannot be operated
If a button indicated with “
” is pressed, the operation lock display (I on page 1) flashes, but the air conditioner will not
respond.
*1: If the wired remote controller is connected to the indoor unit, a wireless remote controller cannot be used.
*2: Before connecting the remote controller, the remote controller cord must be modified.
*3: The fan speed cannot be changed for some large, duct-type indoor units.
*4: This button cannot be operated for the AIRSTAGE S-series remote controllers.
*5: This button cannot be operated for the AIRSTAGE J-series and V-series remote controllers.
*1
*2