Fujitsu UTY-RNNUM User Manual

PART NO. 9373328148-02
INSTALLATION MANUAL
AIR CONDITIONER
REMOTE CONTROLLER
(WIRED TYPE)
UTY-RNNUM
Contents
1. SAFETY PRECAUTIONS ............................................. 2
2. ACCESSORIES ............................................................ 2
3. ELECTRICAL REQUIREMENT ..................................... 2
4. SELECTING AN INSTALLATION LOCATION ............... 3
4.1. Dimensions ............................................................ 3
4.2. Name of parts ......................................................... 3
5. INSTALLING THE REMOTE CONTROLLER ............... 4
5.1. Installation .................................................................4
5.2. Setting the DIP switch ............................................ 4
5.3. Connection of remote controller cable ................... 5
6. INSTALLATION METHODS .......................................... 5
6.1. Group control ......................................................... 5
6.2. Dual remote control ............................................... 6
7. TURNING ON THE POWER ......................................... 6
8. SETTING THE ROOM TEMPERATURE DETECTION
LOCATION .......................................................................6
9. FUNCTION SETTING ................................................... 7
10. TEST OPERATION ....................................................... 9
11. ERROR CODES ........................................................... 9
For authorized service personnel only.
EnglishFrançaisEspañol
9373328148-02_IM_EN_FR_SP.indb 19373328148-02_IM_EN_FR_SP.indb 1 9/14/2010 1:14:03 PM9/14/2010 1:14:03 PM

Fujitsu UTY-RNNUM Specifications

General

Brand	Fujitsu
Model	UTY-RNNUM
Category	Remote Control
Language	English

Summary

Safety Precautions

Accessories

Electrical Requirement

Selecting an Installation Location

Dimensions

Provides physical dimensions of the remote controller unit for installation planning.

Name of Parts

Identifies various buttons and indicators on the remote controller's display panel.

Installing the Remote Controller

Installation

Details the physical process of mounting the remote controller unit on a wall or box.

Setting the DIP switch

Explains how to configure internal DIP switches for various operational settings.

Installation Methods

Group control

Describes how to connect and operate multiple indoor units with a single remote controller.

Connection of Remote Controller Cable

When connecting to the wall mounted type connector

Instructions for connecting the remote controller cable to a wall-mounted unit's connector.

When connecting to the exclusive terminal block

Instructions for connecting the remote controller cable to an indoor unit's terminal block.

Turning on the Power

Setting the Room Temperature Detection Location

Indoor Unit Setting (Factory Setting)

Uses the indoor unit's temperature sensor as the default for detection.

Indoor Unit/Remote Controller Setting

Allows selection between indoor unit or remote controller sensor for temperature detection.

Function Setting

Filter Sign

Setting the interval for the filter cleaning indicator display.

Test Operation

Error Codes