Fujitsu UTY-RCRYZ1 - Comfort Airflow Function; Comfort Airflow Setting; Horizontal Airflow Direction Setting; Vertical Airflow Direction Setting

Operation Flow (when operating the indoor unit equipped with the comfort airfl ow function)
Monitor Screen (during operation)
* For the indoor unit not equipped with the
comfort airfl ow function, “ ” will
not be displayed.
Operation Menu Items
: Proceeds to the next menu. Confi rms the selected setting.
: Selects an item.
After completing the setting, press several times to return to the moni-
tor screen.
If no action is made for 10 minutes, the screen returns to the monitor
screen.
A setting screen is not displayed if the indoor unit does not have the cor-
responding setting or if the function is limited by the central controller.
* When comfort airfl ow is enabled, the
airfl ow direction cannot be set. Proceed
to “4. OFF timer setting”.
Flash
Flash
Flash
Flash
Flash
Flash Flash
Flash
Flash
Flash
Flash
<Cancel> <Enable>
Horizontal airfl ow direction setting OFF timer setting
Check the display status of the icon.
When setting “Individual HZ Hold”, the icon
display changes. When setting “Bulk HZ”,
airfl ow outlet to move the louver changes.
* After the airfl ow direction is selected, the louver moves after 3 seconds.
[Individual HZ Hold- Left]
[Individual HZ Hold- Middle]
[Individual HZ Hold- Right]
[Bulk HZ]
<Cancel>
<Cancel>
<Cancel>
<Enable>
<Enable>
<Enable>
All no (bulk setting disabled)
All yes (bulk setting enabled)
To set “Bulk HZ” after setting “Individual HZ
hold”, fi rst cancel each settings of the airfl ow
direction fl aps with the “Individual HZ hold”
setting.
(Press to proceed to “3. Vertical
airfl ow direction setting”.)
Comfort airfl ow setting
Horizontal airfl ow direction setting
Vertical airfl ow direction setting
OFF timer setting
Filter sign reset
Display
status
Airfl ow outlet
Left side Middle Right side
Yes No No
No Yes No
No No Yes
Yes Yes No
Yes No Yes
No Yes Yes
* After the airfl ow direction is selected, the louver moves after 3 seconds.
3
Vertical airfl ow direction setting
4
OFF timer setting
5
Filter sign reset
Monitor Screen
<Cancel>
Flash
Flash
Flash Flash
Flash
<Reset> <Do not reset>
* After “Reset” is selected, the fi lter sign
is reset after 3 seconds.
9373329657-01_OM_En.indd 29373329657-01_OM_En.indd 2 9/4/2019 10:25:19 AM9/4/2019 10:25:19 AM