EasyManua.ls Logo

FULL CHEEKS 5318500 User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Screws
(X5)
(spare included)
Screws and
Barrels (X6)
Food Bowl
(X1)
Ramp (X1)
Hay Feeder
(X1)
Plastic Base (X1) Drawer (X1) Fleece (X1) Wire Habitat (X1) Door (X1)
Steel Tube
Supports (X3)
Water
Bottle (X1)
Item # 5318500
WARNING: Use care to avoid pinching of fingers during assembly. Adult assembly required.
EASY-CLEAN COTTAGE
GUINEA PIG HABITAT ASSEMBLY INSTRUCTIONS
Assemble the steel tube supports onto the plastic base posts
and secure with the screw and barrels with hex wrenches.
Assemble the door by snapping the hinges in place as shown.
Ensure the latch secures the door from opening.
Shelf (X1)
Bottom Corner
Clips (X5)
(spare included)
Habitat
Clips (X5)
(spare included)
Center
Clips (X5)
(spare included)
Hex
Wrenches
(X2)
Fix with
screw and barrels
Unfold the front and back panels of the wire habitat, followed
by the side panels and secure with bottom and center clips
as shown.
Remove the adhesive backing from the hook and loop
fastener tabs on the fleece and evenly apply it to the bottom
of the drawer. Insert the drawer into the base.
Question and Answer IconNeed help?

Do you have a question about the FULL CHEEKS 5318500 and is the answer not in the manual?

FULL CHEEKS 5318500 Specifications

General IconGeneral
BrandFULL CHEEKS
Model5318500
CategoryPet Care Product
LanguageEnglish

Summary

Guinea Pig Habitat Assembly Instructions

Step 1: Assemble Base Supports

Assemble steel tube supports onto plastic base posts using screws, barrels, and hex wrenches.

Step 2: Attach Fleece and Insert Drawer

Apply hook and loop fasteners to fleece, attach to drawer, and insert drawer into base.

Step 3: Assemble Wire Habitat Panels

Unfold and secure front, back, and side wire habitat panels with bottom and center clips.

Step 4: Assemble and Attach Door

Snap door hinges into place and ensure the latch secures the door from opening.

Step 5: Secure Wire Habitat to Base

Place wire habitat onto plastic base and secure using habitat clips.

Step 6: Position and Fix Shelf

Position shelf vertically along the second wire spacing and fix with screws.

Step 7: Attach Ramp, Feeder, and Bottle

Hook ramp over shelf, attach hay feeder and water bottle, and place food bowl on shelf.

Care and Safety Information

General Caution

Always select appropriate habitat size and type; observe pet behavior; replace if damaged. Contains small parts.

Care Instructions

Wipe with a damp cloth and mild, pet-safe cleaner. Allow to air dry. Avoid direct sunlight.

Feeding and Water Tip

Provide constant food/water. Remove bottle holder to refill, fill completely with cool, clean water.

Related product manuals