1
2
Assemble the top and back panels to the side panels using
the top, center, and bottom clips as shown in Step 2. Ensure
the vertical wires on panels face inward, and the top door is
positioned to open upward. Connect the back panel to the
base with the habitat clips.
Castors
with
Lock (X4)
Castors
(X2)
Screws
(X5)
(spare included)
Food Bowl
(X1)
Ramp (X1)Hay Feeder
(X1)
Plastic Base (X1) Water
Bottle (X1)
Castors(X2)
Castors with Lock (X4)
Assemble the wheels to the bottom of the plastic base.
Open the top panel and position the shelf vertically along
the second wire spacing from the base. Use the screws to
fix in position as shown.
Shelf(X1)
Front Panel (X1) Top Panel and
Back Panel (X1)
Side Panel (X2) Wire
Rod (X2)
Top Corner
Clips (X5)
(spare included)
Bottom Corner
Clips (X5)
(spare included)
Habitat
Clips (X5)
(spare included)
Center
Clips (X9)
(spare included)
Assemble the front and side panels to the base using the top,
center, and bottom clips as shown. Ensure the vertical wires
on panels face inward, and the front doors open outward.
Connect the front panel to the base with habitat clips.
Item # 5318502
WARNING: Use care to avoid pinching of fingers during assembly. Adult assembly required.
MULTI-PET MANSION
MULTIPLE GUINEA PIG HABITAT
ASSEMBLY INSTRUCTIONS
To Next Page
Need help?
General
