Fulltone Full-Drive1 User Manual

Model FD1
Congratulaons on your purchase of the
2018 FMP Inc. All Rights Reserved
The Fulltone Full-Drive2 has always been a Tube-Screamer killer, plain and simple. The original Full-Drive2
shined with the addion of its vicious Comp-Cut (CC) mode which pummels the input of even the most
stubborn tube amp. Add to that Flat-Mids (FM) mode for another choice offering slightly more open, natural
sound. The only drawback to the Full-Drive2 is the size and the fact that many people just don’t use the
“Boost” channel that much, so for 20 years people have been screaming at me for a small, single channel
version that sounds like the early 90s Full-Drive2s. Well, it’s here...beer late than never, I always say.
Enter the Full-Drive1 (FD1) with its JRC4558 opamp, full-size audiophile-grade capacitors, internal baery
cradle, 9-18VDC operaon, ny bullet-proof steel enclosure, top-mounted jacks, True-Bypass, a warmer
early-90s Comp-Cut mode than any FD2, and an even more natural sounding Flat-Mids mode. Vintage (V)
mode has gorgeous, cut-though-the-mix, MIDRANGE but with more harmonic content and a ton of sustain.
This isn’t your Dad’s Full-Drive!
enjoy your new FD1,
Michael Fuller/ Product Designer & President

Fulltone Full-Drive1 Specifications

General

Type	Overdrive
Bypass	True Bypass
Input Impedance	1 MΩ
Current Draw	8 mA
Controls	Volume, Tone
Power Supply	9V DC
Output Impedance	10 kΩ