Fulltone FULL-DRIVE 2 - User Manual

Model FD2 V2
2018 FMP Inc. All Rights Reserved
The Fulltone Full-Drive2 has always been a Tube-Screamer killer, plain and simple. The original Full-Drive2’s
ĨŽŽƚƐǁŝƚĐŚĂďůĞŽŽƐƚDŽĚĞǁĂƐƐŵĂƌƚďƵƚƐŝŵƉůLJĂǁĂLJƚŽƐǁŝƚĐŚďĞƚǁĞĞŶƚǁŽĚŝīĞƌĞŶƚĚŝƐƚŽƌƟŽŶƐĞƫŶŐƐ
ŽŶƚŚĞŇLJůƚŚŽƵŐŚŝƚǁŽƌŬĞĚŶŝĐĞůLJŝƚĚŝĚŶŽƚĂůůŽǁLJŽƵĂƐĞƉĂƌĂƚĞsŽůƵŵĞůĞǀĞůĨŽƌĞĂĐŚŵŽĚĞŵĂŬŝŶŐŝƚĂ
challenge to balance the two modes.
Enter the Full-Drive2 V2
EŽƚŽŶůLJĚŽĞƐsϮŚĂǀĞĂƐĞƉĂƌĂƚĞǀŽůƵŵĞĐŽŶƚƌŽůĨŽƌƌŝǀĞϮĐŚĂŶŶĞůŝƚŚĂƐĂƚŽŶŽĨĐůŝƉƉŝŶŐDŽĚĞƐŝŶĐůƵĚŝŶŐ
Comp-Cut (CC) , the warmer 90s version, which is anything-but transparent, and pummels your amp’s input.
Vintage Mode;s/EͿǁŝƚŚŝƚƐƐůŝŐŚƚůLJĂƐLJŵŵĞƚƌŝĐĂůĨĂƚǁĂƌŵƐŽƵŶĚ
Flat-Mids;&DͿƚŚĞǁĂƌŵĞƌĨĂƩĞƌ&DĨƌŽŵƚŚĞůĂƚĞϵϬƐĞĂƌůLJϮϬϬϬƐ
WIDEŵŽĚĞŵŽƌĞŽƉĞŶŵŽƌĞďŽƩŽŵͲĞŶĚŵŽƌĞĐůĂƌŝƚLJ
Half-Clipped (HC) mode, where the bass notes are less distorted and the higher notes sing for days.
&ĞĂƚƵƌĞƐŝŶĐůƵĚĞĂ:ZϰϱϱϴŽƉĂŵƉĨƵůůͲƐŝnjĞĂƵĚŝŽƉŚŝůĞͲŐƌĂĚĞĐĂƉĂĐŝƚŽƌƐŝŶƚĞƌŶĂůďĂƩĞƌLJĐƌĂĚůĞϵͲϭϴs
ŽƉĞƌĂƟŽŶĂƟŶLJďƵůůĞƚͲƉƌŽŽĨƐƚĞĞůĞŶĐůŽƐƵƌĞƚŽƉͲŵŽƵŶƚĞĚũĂĐŬƐĂŶĚdƌƵĞͲLJƉĂƐƐƵƐŝŶŐŽƵƌŽǁŶ&ƵůůƚŽŶĞ
3PDT footswitch.
This is the one pedal you could take to any session or gig and have every sound you’d need at your disposal.
ĞŶũŽLJŝƚ

Summary

Fulltone FD2 V2 Overview

Introduction to Full-Drive2 V2

Details the enhancements and dual-channel volume control of the V2 model.

Full-Drive2 V2 Clipping Modes

Explains the different clipping modes: CC, VIN, FM, WIDE, and HC for tonal shaping.

Full-Drive2 V2 Key Features

Lists internal components and build quality aspects of the FD2 V2 pedal.

FD1 Features and Specifications

Core Controls Explained

Details the ON/OFF footswitch, VOLUME, TONE, and OVERDRIVE knobs for operation.

Clipping Switch Options

Describes the different diode clipping modes affecting the overdrive character.

Sample Settings

Provides example knob and switch settings for various playing styles.

Technical Specifications

Lists input/output impedance, current draw, and other technical details.

Powering the Pedal

Covers battery and DC adapter requirements, including voltage and polarity.

Battery Replacement Procedure

Instructions for safely removing and replacing the internal battery.

Product Warranty Information

Details the limited 5-year warranty terms and conditions.

Fulltone FULL-DRIVE 2 Specifications

General

Type	Overdrive
Bypass	True Bypass
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Current Draw	10 mA
Controls	Tone, Boost
Switches	Boost
Power	9V DC, Battery or Adapter
Input Impedance	1M ohm
Output Impedance	10k ohm