Fulltone FULL-DRIVE 2 V2 - User Manual

Model FD2 V2
2018 FMP Inc. All Rights Reserved
The Fulltone Full-Drive2 has always been a Tube-Screamer killer, plain and simple. The original Full-Drive2’s
footswitchable Boost Mode was smart, but simply a way to switch between two different distoron sengs
on the fly. Although it worked nicely, it did not allow you a separate Volume level for each mode, making it a
challenge to balance the two modes.
Enter the Full-Drive2 V2
Not only does V2 have a separate volume control for Drive 2 channel, it has a ton of clipping Modes including:
Comp-Cut (CC) , the warmer 90s version, which is anything-but transparent, and pummels your amp’s input.
Vintage Mode (VIN) with its slightly asymmetrical, fat, warm sound.
Flat-Mids (FM), the warmer, faer FM from the late 90s/early 2000s.
WIDE mode, more open, more boom-end, more clarity.
Half-Clipped (HC) mode, where the bass notes are less distorted and the higher notes sing for days.
Features include a JRC4558 opamp, full-size audiophile-grade capacitors, internal baery cradle, 9-18VDC
operaon, a ny bullet-proof steel enclosure, top-mounted jacks, and True-Bypass using our own Fulltone
3PDT footswitch.
This is the one pedal you could take to any session or gig and have every sound you’d need at your disposal.
enjoy it!

Summary

Fulltone FD2 V2 Introduction

Enter the Full-Drive2 V2 Features

Introduces the Full-Drive2 V2, highlighting its separate volume control for Drive 2 and multiple clipping modes.

Fulltone FD2 V2 Specifications

Drive 1 Main Channel Operation

Details the controls for the main Drive 1 channel, including On/Off, Volume, Tone, and Drive 1 overdrive.

Drive 2 Channel Operation

Explains the Drive 2 channel features, including its separate volume and distortion settings.

Clipping Mode Selection

Describes the various clipping modes (CC, VIN, FM, WIDE, HC, STD) controlled by toggle switches.

Powering and Battery

Covers power supply options (9-18VDC) and battery replacement procedures for the pedal.

Product Warranty Information

Outlines the terms and conditions of the 5-year limited warranty for Fulltone products.

Fulltone FULL-DRIVE 2 V2 Specifications

General

Type	Overdrive
Bypass	True Bypass
Weight	1.2 lbs
Current Draw	10 mA
Power Supply	9V DC
Input Impedance	1M ohm
Output Impedance	10K Ohms