Need help?Do you have a question about the fully Jarvis L-shaped standing desk and is the answer not in the manual?
Covers general cautions, voltage converter use, liability, and initial preparation steps before assembly.
Lists and illustrates all frame, electric, and hardware parts included in the package.
Choosing the desk's configuration and handset placement.
Attaching side legs to frame ends (Steps 2-3).
Attaching remaining side leg and frame brackets (Steps 4-5).
Attaching side brackets, corner leg, and frame ends (Steps 6-8).
Connecting desk tops using mending plates (Step 9).
Sliding center rails and support, attaching corner leg assembly (Steps 11-12).
Sliding second set of center rails and securing final leg assembly (Steps 13-14).
Locking center rails and installing crossbars for stability (Steps 15-16).
Installing handset, control box, and connecting cables (Steps 17-19).
Attaching feet, final checks, and flipping the desk (Steps 20-22).
Syncing desk components for proper operation.
Programming and using favorite height settings.
Adjusting height readout, locking desk, and changing touch presets.
Setting custom minimum and maximum desk heights.
Steps to reset the desk to resolve operational issues.
Guidelines for placing the frame on a custom desktop and layout options.
Steps for aligning and attaching the frame to the desktop.
Details on desk dimensions, travel speed, load capacity, and operating noise.
Provides Fully's address, phone number, and email for support.
General| Shape | L-shaped |
|---|---|
| Type | Standing Desk |
| Weight Capacity | 350 lbs |
| Frame Material | Steel |
| Assembly Required | Yes |
| Desktop Material | Laminate, Solid Wood |
| Adjustable Speed | 1.5 inches per second |
| Motor Type | Dual Motor |
| Noise Level | Under 50 dB |
| Warranty | 15 years (frame), 5 years (electronics) |
| Programmable Memory | 4 height presets |
| Desktop Colors | Multiple options (varies by material) |
To Next Page
