Questions? Please Contact Your Local Manufacturer’s Representative
6-3
SECTION 6 ModSyncSE-User-Manual-211020 WARRANTY & PARTS
! WARNING
This manual is provided as a
guide to the correct operation and
maintenance of your equipment,
and should be read in its entirety and
be made permanently available to
the sta responsible for equipment
operation. It should not, however
be considered as a complete code
of practice, nor should it replace
existing codes or standards which
may be applicable. Fulton reserves
the right to change any part of
this installation, operation and
maintenance manual without notice.
Do not install, operate, service,
or repair any component of this
equipment unless you are qualied
and fully understand all requirements
and procedures.
All information in this manual is for
reference and guidance purposes,
and does not substitute for required
professional training, conduct,
and strict adherence to applicable
jurisdictional /professional codes or
regulations
Questions? Call (315) 298-8510, or visit us online at www.fulton.com
-If- Outdoor Sensor is Enabled
-If- Return Sensor is Enabled
-If- Supply Pressure Sensor is Enabled
Supply Pressure High Range
-If- Return Pressure Sensor is Enabled
Return Pressure High Range
-If- Differential Pressure Sensor is
Enabled
Differential Pressure Mode
Differential Pressure Bias
-If- Running Transition is Enabled
-If- Warm Standby is Enabled
To Next Page
Loading...