FUNAI SV2000 - Audio and Display Features; Virtual Surround Sound; On-Screen Information Display

- 25 - EN
You can enjoy surround-sound effect over two speak-
ers on this unit.
1 Press [MODE] twice (CD: once) during play-
back.
2 Press [ENTER] to set it “1” (Natural effect),
“2” (Emphasized effect) or “OFF”.
3 Press [MODE] to exit.
¡You can also exit the menu by pressing [RETURN].
NOTE: (for CD play only)
¡Virtual Surround will not be effective if the sound
mode is set to something other than STEREO.
CD DVD-V
VIRTUAL SURROUND
THE ON-SCREEN INFORMATION
For Audio CDs
1 Press [DISPLAY] during playback to show
the current Track.
¡The elapsed and remaining playing time of the cur-
rent track will be displayed.
2 Press [DISPLAY] again to show current Total
Track.
¡The elapsed and remaining playing time of the total
track will be displayed.
3 Press [DISPLAY] again to exit.
NOTE:
¡When you are playing a disc in PROGRAM or
RANDOM mode, “ PROGRAM” (or RAN-
DOM) will be displayed at step 2.
You can check the information about the current disc by pressing [DISPLAY].
CD DVD-V
For DVD-Vs
1 Press [DISPLAY] during playback to show
current Chapter.
¡The elapsed and remaining
playing time of the current
chapter will be displayed.
2 Press [DISPLAY] again to show current Title.
¡The elapsed and remaining
playing time of the current
title will be displayed.
3 Press [DISPLAY] again.
¡The bit rate and the current
repeat setting will be
displayed.
¡If you are playing a dual layered disc, the layer num-
ber will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).
4 Press [DISPLAY] again to exit.
OFF
9/49 0:00:00 -0:03:30
4/12 0:03:21 - 0:02:15
T
4/12 0:13:45 - 0:45:40
T
1/3 0:00:00 - 1:23:45
TL1
PROGRAM B
All manuals and user guides at all-guides.com