Assembling Parts
1. Use bolts & washers (Package B) provided to connect the Long stand (F)
and the 2 pcs square pole (E) together.
2. Connect the completed above (1) with the short stand (G) by the bolts & washers
(Package B).
3. Insert axle (H) into short stand. Place sleeves and washers (Package C) onto each side
of wheels (J) and then x it with round cap nuts by wrenches provided (Package D).
4. Turn the storage cabinet (K) up side down for convenient assembling.
Insert both ends of the short and long stand into the bottom of (H)
and then x by bolts in (Package B).
5. Turn the complete unit back to up-right position.
Install the handrail (D) onto the left hand & the
working platform (C) on the right hand by bolts
& nuts with washers included in (Package A).
6. Place the main unit (A) onto the topside of the
storage cabinet. (Caution: Power cord outlet
should be inserted into the u-shape position.
7. Hook up the Kettle (B) onto the hanger.
(Caution: Roller bar should be on the
door side and also check if gears
between pot and ceiling are perfectly
matched ) .
8. Connect the power plug from the
ceiling with the socket on the bottom of
the kettle
9. Open the door of the storage cabinet and
release the spring shaft beneath the main unit
in order to x the main unit with
the storage base.
Main unit can be used alone
and placed onto stable
countertop for operation.
(CART)
To Next Page
Loading...
