Furius FIX 181 MINI - Duty Cycle

11
Input Voltage
Frequency
Open Circuit
Voltage
Output
Current
Range
220V
Output
Current
Range
110V
Duty Cycle at
40°*
110V / 220V – 1ph
(+/- 10%)
50/60 Hz
65V
20–180A
20-120 A
40%
Min. recommended
fuse
Output current
type
Insulation class
IP
Weight
25A
DC
I.CL.H
IP 21 S
3 Kg
PRODUCT DETAIL
4.
Details
 Voltage 110/220V 50/60Hz.
 DC output current, recommended for 6013, 7018 3/32” electrodes.
 TIG.
 ARC FORCE, HOT START and MMA.
 DIGITAL DISPLAY.
 180A DC.
 40% duty cycle at 40°C*.
Duty cycle
Duty cycle is the percentage of time that the welding machine can deliver continuous welding
current, in a period of 10 minutes. In the Furius FW 181 this value is 40% when the output current is
set at the maximum and the ambient temperature is 40 ° C. This percentage increases as the set
output current decreases and / or the ambient temperature decreases.
This means that the machine can deliver its maximum output continuously for 4 minutes, and after
this period the thermal control device will be activated, and the user must let the machine rest (it
should be left turned on) at least for 6 minutes. After this period, you can resume work normally.
The duty cycle may decrease if the ambient temperature rises above 40 ° C.
Warning! Do not exceed the
duty cycles established on the
tech plate included in the
welder and in this instruction.