3
Warning:
To reduce the risk of electrical shock, do not expose this equipment
to rain or moisture. Dangerous high voltages are present inside the
enclosure. Do not remove the covers. There are no user serviceable
parts inside. Refer servicing to qualied personnel only.
Important Safety Instructions
1. Please read and observe all safety and operating instructions
before installing your Power Station-2+6 (PST-2+6). Retain these
instructions for future reference.
2. Your PST-2+6 should not be used near water – for example, near
a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement,
near a swimming pool, etc.
3. Do not place your PST-2+6 near heat sources such as radiators,
heat registers, stoves or other appliances that produce heat.
4. The PST-2+6 should only be connected to a 120 VAC, 60Hz, 15
amp grounded electrical outlet. Do not defeat the ground or change
polarization of the power plug.
5. Route the power cord and other cables so that they are not likely
to be walked on, tripped over, or stressed. Pay particular attention
to the condition of the cords and cables at the plugs, and the point
where they exit your PST-2+6. To prevent risk of re or injury,
To Next Page
Loading...
