4
damaged cords and cables should be replaced immediately.
6. Clean your PST-2+6 with a damp cloth only. Do not use solvents
or abrasive cleaners. Never pour liquid on or into the unit.
7. Your PST-2+6 should be serviced by qualied service personnel
when:
• The power supply cord or the plug has been frayed, kinked, or cut.
• Objects have fallen or liquid has spilled into the unit.
• The unit has been exposed to rain or other moisture.
• The unit does not appear to operate normally, exhibits a marked
change in performance, or the Surge Protection or Ground indicator
is not lit.
• The unit has been dropped, or the enclosure damaged.
8. Your PST-2+6 requires that a safety ground be present for proper
operation. Any attempt to operate the unit without a safety ground is
considered improper operation and could invalidate the warranty.
Operation
AC, Telephone, and Coaxial Connectors
Telco – Satellite / Cable Transient Voltage Surge Suppressors:
The PST-2+6 features transient voltage surge suppression for both
standard telephone lines, as well as cable and satellite lines utilizing
standard coaxial connectors. As these surge suppressors are in-line,
they will require an additional cable (supplied with the PST-2+6) to
To Next Page
Loading...
