Need help?Do you have a question about the Furman AC-210 E and is the answer not in the manual?
Power| AC current capacity input | 15 Amp |
|---|---|
| AC current capacity output | 15 Amp RMS |
| transient voltage surge suppression domestic | 188V peak clamping @ 6000V/3000A input |
Noise Attenuation| AC noise attenuation transverse mode | >40dB from 10kHz to 100kHz |
|---|---|
| AC noise attenuation transverse mode extended | 80dB from 100kHz to 1GHz |
Weight and Dimensions| height | 1.75 inches |
|---|---|
| width | 5 inches |
| depth | 8.5 inches |
Read and observe all safety and operating instructions before installing your unit and retain for future reference.
Indicates when input voltage exceeds safe limits, causing the unit to shut down power to protect equipment.
Shows if surge protection components are functioning correctly; turns off if damaged.
To Next Page
