Why is the image blurred, distorted, or dark on my Furrion Car Navigation system?
If the image on your Furrion Car Navigation system appears blurred, distorted, or dark, the issue might be due to using an illegally copied disc. Use an original disc to resolve this.
Why are the ID3 tags shown incorrectly on my Furrion Car Navigation system?
If the ID3 tags are shown incorrectly on your Furrion Car Navigation system, it may be because the message is longer than the LCD can display, or the ID3 tag is not compatible. Use proper ID3 tag information to resolve this.
How to correct prolonged image or improper height/width ratio on Furrion NV2200 Car Navigation system?
If you're experiencing a prolonged image or an improper height/width ratio on your Furrion Car Navigation system, the issue is likely an improper aspect ratio setup. To resolve this, use the correct aspect ratio setting.
Why is there no image on my Furrion Car Navigation system?
If your Furrion Car Navigation system is not displaying an image, it might be because the parking brake is not engaged. Stop the vehicle in a safe place and apply the parking brake. Another reason could be that the parking wire was incorrectly connected; ensure it is properly connected. Also, touch the monitor to activate the display.
What to do if Furrion Car Navigation system disc does not play back?
If your Furrion Car Navigation system is not playing a disc, it could be due to several reasons. Check if the disc is warped, scratched, dirty, or wet; use a disc in good condition and clean it with a soft cloth if necessary. Also, ensure you are using a compatible disc. Clean the laser pickup with a cleaning disc. Finally, verify that the disc region code is compatible with the unit.
How to improve weak station searching on Furrion NV2200?
If your Furrion Car Navigation system is showing weak station searching, there are a few things you can check. Ensure that the auto antenna is properly connected. Also, verify that the adapter with the antenna power supply is correctly connected. Finally, make sure that the AF (Automatic Frequency) function is activated.
Why is the sound quality poor or distorted on my Furrion NV2200 Car Navigation system?
If you're experiencing poor sound quality or distortion with your Furrion Car Navigation system, it could be due to several reasons. First, check if you are using an original disc, as unauthorized discs can cause this issue. Second, ensure that the speaker power rating is compatible with the unit; if not, connect proper speakers. Lastly, check the speaker connections to make sure the speaker is not shorted.
What to do if my Furrion NV2200 Car Navigation system has no or low audio output?
If you are experiencing no or low audio output from your Furrion Car Navigation system, consider the following: * Check the wiring and connections to ensure they are properly connected. * Increase the volume level, as it may be set too low. * If only one channel is playing, check the balance and fader adjustments. * Inspect the speakers for damage and replace if necessary. * Ensure that the speaker wiring is not in contact with any metal parts of the car; insulate the connections or replace the speaker cable if needed.
General| Display Size | 7 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| GPS Navigation | Yes |
| Bluetooth | Yes |
| Wi-Fi | No |
| Operating System | Windows CE 6.0 |
| Battery | Rechargeable Lithium-Ion |
| USB Port | Yes |
| SD Card Slot | Yes |
Instructions for inserting, watching, ejecting discs, and system setup.
How to pause and resume video playback.
How to search for specific chapters or titles within a DVD.
How to pause and resume playback of video files.
References disc operations and details the CD player interface.
Methods for pausing, resuming, and switching tracks for CD audio.
Introduces the Equalizer settings for audio adjustment.
Fine-tuning audio frequencies and subwoofer output.
Steps to select and enable the USB Audio playback mode.
How to pause and resume playback of USB audio files.
Steps to select and enable the USB Video playback mode.
How to play video files stored on USB memory.
How to pause and resume playback of USB video files.
How to search for USB video files using their numbers.
Steps to select and enable the Bluetooth Audio playback mode.
Steps to select and enable the Bluetooth Telephone mode.
Process for pairing cellular phones with the system.
How to call numbers from the dialed, received, or missed call logs.
How to answer or reject an incoming phone call.
Steps to access and operate the radio tuning functions.
Solutions for power issues, low audio, and poor sound quality.
Solutions for screen problems like no image or incorrect aspect ratio.
To Next Page