1-14
1.6.6 Printer interface
Referring to the outline drawing at the end of this manual, fix the printer interface with tapping
screws (local supply) to tabletop or bulkhead.
92
70+0.5
270
260+0.5
243
5
15
5 Fixing holes
1.6.7 Automatic Antenna Switch
Install the automatic antenna switch between the SSB antenna and the antenna coupler. This
unit allows you to connect the antenna to ground remotely when there is a possibility of lightning
or the antenna must be grounded to comply with local regulations when returning to a harbor.
Mount the unit on the bulkhead by using four self-tapping screws (5x20, supplied).
200
200
Fixing hole (4 pcs.)
Fasten four self-tapping screws
(5x20, supplied) to mount the unit.
To Next Page
Loading...
